Warbeast
2012. 09. 03., 22:52
1680cc Bosch direct fit plug&play SR20DET 4G63T CA18DET 13BT
Datasheet:
Flow rates:
160 lbs/hr, 1680 cc/min at 43.5 psi (3.0 bar)
173 lbs/hr, 1815 cc/min at 50.8 psi (3.5 bar)
186 lbs/hr, 1950 cc/min at 58.0 psi (4.0 bar)
This injector will function at rail pressures in excess of 101 PSI, 7 bar.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomization for modern multi-valve engines
This set will require no more than a 1% trim for easy tuning
Latency (dead time): 0.555 ms at 14 volts (Complete dead time table with every set).
Injector type: Peak and hold
Fuel Delivery: Single-hole Pintle
Spray pattern: Wide cone
Spray type: wide cone, maximum atomization
Resistance: 2.5-3.2 Ohms
Fuel types: Gasoline, Methanol, E85, E25, E10
A téma adott, kivételesen postázom egyenesen magyarországra.
Érdeklődni itt vagy email(warminator@gmail.com) vagy telefon(+36304249543)
Ára postával 130.000 darab magyar forint.
Datasheet:
Flow rates:
160 lbs/hr, 1680 cc/min at 43.5 psi (3.0 bar)
173 lbs/hr, 1815 cc/min at 50.8 psi (3.5 bar)
186 lbs/hr, 1950 cc/min at 58.0 psi (4.0 bar)
This injector will function at rail pressures in excess of 101 PSI, 7 bar.
Excellent low pulse width response with predictable response down to 2ms.
Excellent atomization for modern multi-valve engines
This set will require no more than a 1% trim for easy tuning
Latency (dead time): 0.555 ms at 14 volts (Complete dead time table with every set).
Injector type: Peak and hold
Fuel Delivery: Single-hole Pintle
Spray pattern: Wide cone
Spray type: wide cone, maximum atomization
Resistance: 2.5-3.2 Ohms
Fuel types: Gasoline, Methanol, E85, E25, E10
A téma adott, kivételesen postázom egyenesen magyarországra.
Érdeklődni itt vagy email(warminator@gmail.com) vagy telefon(+36304249543)
Ára postával 130.000 darab magyar forint.